A network administrator is planning redundant devices and cabling in a switched network to support high availability. Which benefit will implementing the Spanning Tree Protocol provide to this design?
a. Redundant paths can be available without causing logical Layer 2 loops.b. Faster convergence is available for advanced routing protocols.c. Network access can be expanded to support both wired and wireless devices.d. Multiple physical interfaces can be combined into a single EtherChannel interface.

Question

contestada

Respuesta :

mahamnasir mahamnasir · Answer 1 · 2020-01-31T08:12:41+01:00

Answer:

Redundant paths can be available without causing logical Layer 2 loops.

Explanation:

Spanning Tree Protocol is used to allow redundancy in the Layer 2 switched networks without creating cycles/circles also called loops.

When two parts of the switched network are connected via two or more Layer 2 switches this result in a loop.

This affects the performance of the network as the result of broadcast packets flooding.

STP puts one port of the switch to forward mode and the rest of the ports within the same part of the network to the blocking mode to avoid broadcast packet flooding. STP puts all the ports that are allowing redundant paths to block mode and the one port that is left after this is placed in forward mode.

Spanning Tree Algorithm is used by STP to determine the optimal path of switch to the network.

Bridge Protocol Data Units are used to share the information about the optimal path determined by the spanning tree algorithm with other switches.

So this is how STP tracks all the links in the switched network and eliminates redundant loops by allowing only one active path to the destination while blocking all other paths.